Pigment blue 15:2

Technical parameters of Pigment blue 15:2

रंग अनुक्रमणिका क्रमांकPigment blue 15:2
सीएएस क्रमांक12239-87-1
EU क्रमांक205-685-1
Chemical GroupPhthalocyanine
आण्विक वजन611.52
आण्विक फॉर्म्युलाC32H15CiCuN8
पीएच मूल्य7.0
घनता1.5
तेल शोषण (मिली / 100 ग्रॅम)%50
हलकी वेग8
उष्णता प्रतिरोध200 (°C)
पाणी प्रतिकार5
तेल प्रतिकार5
.सिड प्रतिकार5
क्षार प्रतिकार5
Benzene Resistance5
Ketone Resistance5
Soap Resistance5
Bleeding Resistance5
Migration Resistance5
Density ( g/cm3)1.5
Moisture (%)≤1.0
Water Soluble Matter (%)≤1.0
Oil Absorption (ml/100g)35-45
Electric Conductivity (us/cm)≤400
Residue on 325 mesh sieve (Wet method)PPM≤80
Magnetic on 325 mesh sieve (Wet method)PPM≤8
PH Value6.5-7.5
color
आण्विक रचना

Handling and storage

Handling:
Usual precautions for nuisance dust should be observed.
Protection against fire and explosion:
The product is non-flammable

Storage:
Store in roofed places at room temperature Keep containers tightly sealed.
Flammability Class: nor applicable.

भौतिक आणि रासायनिक गुणधर्म

Appearance: blue powder Odor: mild
Melting point:460℃ Relative density:1.36-1.80
Decomposition: None Flammability: see 7 handling
Molecular formula:C32H16CuN8 Molecular Weight: 576.07
Tinting strength: 95-105% of the standard Volatile matter at 105℃: 2.5%max
Soluble matter in water: 1.5% max Oil absorption:28-62%
Fastness to light:7-8 Fastness to heat(℃):200
Bleeding resistance water: 5 Bleeding resistance linseed oil:5
Bleeding resistance acid:5 Bleeding resistance alkalis:5
Bleeding resistance alcohol:5 Bleeding resistance xylone:4
Bleeding resistance ethyl acetate:4

Stability and reactivity

Hazardous decomposition products
No decomposition at proper storage and application conditions

Toxicological Information

Because of experience with product mentioned, there are no recognizable hazards for human
beings, if it is correctly used and applied.

 Ecological information

Avoid filtration into waster draining or soil.

Disposal considerations

Uses should acquaint themselves with local regulations.
Disposal is usually carried out by burying at an approved tip or by incineration by a licensed
waste material processor; stack gases may need to be sorubbed (see section 5 above)

संबंधित उत्पादने

झेया केमिकल्स (हेमेन) कं, लि.

सर्वोत्कृष्ट कोट मिळवा